Install the indicator on the back side of the water meter
1
The look of the installed indicator
2
The look of the indicator after exposure to a magnetic field
3
Position of magnetic elements after exposure to a magnetic field
4
Remove the protective film. The base of indicator become transparent
5
Install the indicator on the front surface of the water meter
6
After fixing the indicators on the meter, install the indicator seal
7
The look of the indicator after exposure to a magnetic field
8
How to use
Design features
The design of the indicator is the polypropylene base with the polymer container located on it, in which two rare-earth magnetic elements installed on a special base. (Fig. 1).
Under the influence of a constant magnetic field, magnetic elements shift from the equilibrium condition and attract to each other. At the same time, their primary position changes irreversibly (Fig. 2).
Fig. 1
Fig. 2
-
The Indicator of Magnetic Field Influence designed for external installation.
-
The Indicator installs on the measuring devices located in the places with high humidity and possibility of flooding, low or high temperatures, at the conditions where you cannot use self-adhesive indicators.
-
Тhe Indicator to be installed on a metering device in the area of possible influence of the strong magnetic fields on the sensitive parts such as stepper motors, magnetic couplings, etc.
-
Use the sealing wire (preferably stainless steel wire rope PVC coated) and indicative plastic seal for fixing the indicator on the meter.
-
If necessary to install the indicator on the front surface of the meter, remove the protective film. The base of the Indicator become transparent.
-
Under the influence of a constant magnetic field, magnetic elements shift from the equilibrium condition and attract to each other. At the same time, their primary position changes irreversibly.